Micron MT29F2G08ABBGAH4-AATG Flash Memory SLC Nand 2 Gbit 256M x 8bit Parallel Vfbga 63 Pins

MT29F2G08ABBGAH4 is a NAND flash memory. This NAND flash device include an asynchronous data interface for high-performance I/O operations. This device use a highly multiplexed 8-bit bus (I/Ox) to transfer commands, address, and data. There are five control signals used to implement the asynchronous data interface: CE#, CLE, ALE, WE# and RE#. This hardware interface creates a low pin-count device with a standard pinout that remains the same from one density to another, enabling future upgrades to higher densities with no board redesign. A target is the unit of memory accessed by a chip enable signal. A target contains one or more NAND flash die. A NAND flash die is the minimum unit that can independently execute commands and report status. A NAND flash die, in the ONFI specification, is referred to as a logical unit (LUN). There is at least one NAND Flash die per chip enable signal.

• Single-level cell (SLC) technology, asynchronous I/O performance, array performance
• Erase block is 2ms (typical), command set is ONFI NAND flash protocol
• Advanced command set, one-time programmable (OTP) mode, internal ECC disabled by default (parallel)
• Operation status byte provides software method for detecting, operation completion
• RESET (FFh) required as first command after power-on, quality and reliability
• Alternate method of device initialization after power-up (contact factory)
• Internal data move operations supported within the plane from which data is read
• 2Gb density, 8bit device width, SLC level
• 1.8V (1.7-1.95V) operating voltage, asynchronous interface
• 63-ball VFBGA (9 x 11 x 1.0mm) package, automotive operating temperature range from -40C to 105C

Other details

All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.